Luxury, eco-friendliness, and fashion are all hallmarks of Tesla vehicles. A lot of people are interested in electric vehicles like the Tesla Model 3, X, Y, and S. There are times, however, when you have trouble charging them at home. If this happens, don’t panic! For Tesla charging to work right, you just need a little patience, a little knowledge, and maybe a little help. An explanation of the problem is provided in this article, as well as some suggestions for resolving it.
What’s wrong with my Tesla wall charger? Here’s why:
We have to deal with the following problems:
1. My wall charger isn’t working
Charger communication can sometimes be lost, which results in problems with the power source. There are a number of error codes that will appear on the touchscreen in this situation, including CP_a046, CP_a053, and CP_a055.
2. Charger for Tesla Vehicles was not found
The Tesla is not charging at the wall socket at home when it can’t locate the charger. Sensor-related problems can cause this. A warning similar to CP_a043 appears on the screen because the charger is positioned incorrectly.
4. Tripped circuit
Alternatively, the charger’s circuit may have tripped and turned off automatically. You need to determine which circuit powers your car’s Level 1 charger.
5. Unsecure outlet connections
Charger’s power supply connection might be out of sync. The charger plug needs to be fully inserted into the electrical socket. To ensure that it has been completely removed from the wall, remove it from the wall before plugging it back in. If the outlet has been damaged, it should be removed as soon as possible and your electrician contacted. If the outlet is connected to a breaker, you should turn it off as well. There is a risk of something catching fire if you take any chances.
6. Software problems
The wall connection may need to be upgraded at times, and some issue may arise. The firmware needs to be updated. After the update is complete, you’ll get the “Success” signal.
It will restart automatically after that. There are times when this problem is caused by a fault in the car charge cable.
7. Slow Charging
It is possible that the circuit breaker’s maximum output is causing the slow charging from your wall charger. There is a possibility that your Tesla won’t receive enough power from the circuit breaker’s most common output.
8. Verify the Wi-Fi settings
Wi-Fi is used by Tesla to update and upgrade its devices. Tesla chargers must always be connected, which is why they must always be charged. Testing other apps on your phone will verify that your Wi-Fi connection is working. Your router needs to be turned on and your Wi-Fi settings must be accurate if your Wi-Fi doesn’t work.
9. Weather Situations
The weather can also affect the ability of Tesla cars to charge. A car’s proximity to the charger and its surrounding temperature, humidity, and rainfall is called the weather. The weather’s either hot or cold. Drivers’ and passengers’ safety and comfort can be affected by this, as well as the battery system’s and charger’s effectiveness.
Tesla Wall Chargers Won’t Charge? Here’s How To Fix It:
This issue can be solved by following these solutions:
1. Fix the voltage problem
Don’t forget to tighten up each connection. Regardless of how many watts Tesla uses, check the voltage at the wall connector between L1 and ground, L2 and ground, and L1 to L2. The wall connector and beaker should also be covered. The wall connector cover needs to be reinstalled after the breaker has been dropped. In the next step, the breaker must be turned off. Once you have clicked the Tesla plug button, continue to push it. There’ll be 5 green lights for 60A and 4 green lights for 50A depending on the breaker circuit. Then it’ll start flashing blue. Ensure that the Wi-Fi SSID is arranged according to the light numbers by entering the Tesla and connecting the SSID. The Tesla connection should be checked once it has been inserted. If the problem persists, press the Reset button.
2. Resolve connection issues
In the event that your wall connector is not working after you have removed it from your Tesla, connect it again. The circuit breaker should be turned off within 10 seconds after the circuit breaker is turned off. Then, turn the wall connection on to connect a Tesla to the wall.
Changing the wall socket or mobile connector can help you figure out if your Tesla can work with the charger. In case of failure, replace it.
3. Software Issue
Go to the official website to learn more about the wall connector. The file contains “Firmware 22.41.2.”. Download it. The Tesla wall charger’s Wi-configuration needs to be checked. Wi-Fi routers should be attached to wall connections. To upload the firmware file, click “Choose file” and press “Upload” for up to 60 seconds, then navigate to “http://192.168.92.1/update” or “http://192.168.92.1/service.” On the update page, enter “http://192.168.92.1/update” or “http://192.168.92.1/service.”. When the update is complete, you will see “Success.”. This will restart the wall connection.
Blue light on Tesla charger: what does it mean?
It means the wall connector is ready to detect charging signals when the blue light stays steady on the charger. You can charge it now because it’s ready. Tesla wall connectors have blue lights for a reason!
Related Articles
Tesla Charge Port Wont Open [Complete Solution]
Why Is My Tesla Wifi Not Working? [Solution]
What Maintenance Does A Tesla Need? [Explained]
Tesla Dashcam Not Working On Model 3, Y and X
Conclusion
The most common issues with Tesla wall chargers can now be troubleshooted! Observe the results for yourself when you apply what you have learned. In this article you will learn everything you need to know about how to fix the problem if your charger does not work.
